Skip to content

Dexter K71-650-00 - Hydraulic Brake Actuator

by DEXTER
$2,191.82
SKU K71-650-00
Availability: 6 in stock, ready to be shipped

Notify me when back in stock

Electric-hydraulic brake actuator works with your brake controller (sold separately) to activate your trailer's drum brakes. Vented housing releases heat and moisture. Enhanced wiring protection safeguards internal electronics.


Features:

  • Electric-over-hydraulic brake actuator activates your trailer's hydraulic brakes when you apply the brakes in your vehicle
  • Brake controller (sold separately) is required to send signal from tow vehicle to actuator when brakes are applied
  • 7-Way trailer connector (sold separately) is needed to transmit signal from brake controller
  • Improved functionality when compared with surge brake couplers
  • Faster response time - activates when you apply brakes in tow vehicle, as opposed to when trailer pushes against hitch ball
  • No need to manually lock out brakes when you back up
  • Trailer brakes can be intentionally activated when you reverse
  • Manual override on brake controller can be activated so you can engage the trailer brakes without having to apply your vehicle brakes
  • Vented design releases pressure, moisture, and heat to protect the internal components
  • Allows actuator to be mounted in places where most actuators would overheat
  • Electronic, proportional pressure valve ensures smooth, even braking
  • Self-priming pump reduces time needed for brake bleeding
  • Enhanced wiring detects dangerous current levels and shuts down actuator electronics in the event of a surge
  • Durable aluminum housing and stainless steel fasteners resist corrosion
  • Goretite seals protect the circuit board from the elements
  • Compatible with most 9-amp-hour-battery breakaway kits (sold separately)
  • DOT compliant
  • Unit installs on trailer frame and connects to trailer's wiring and hydraulic brake lines (sold separately)
  • Made in the USA


Specs:

  • Application: single-, tandem-, and triple-axle trailers with drum brakes
  • Maximum output pressure: 1,000 psi
  • Dimensions: 11" long x 6" wide x 7" tall
  • Distance between mounting holes (center to center):
    • 2-1/2" between holes on same side of bracket
    • 9-13/16" between holes on opposite sides of bracket
  • Mounting hole diameter: 1/4"
  • Hydraulic port size: 3/16"
  • Power: 12V DC
  • Wire configuration:
    • Black: 12-volt power
    • Blue: brake controller
    • Yellow: breakaway
    • White: ground
  • 2-Year limited warranty

Installation kit

An installation kit is needed for proper installation on your vehicle

Specifications

Brand:Dexter
Status:Active
Manufacturer Part #:K71-650-00
Application:single-, tandem-, and triple-axle trailers with drum brakes
Distance between mounting holes (center to center):2-1/2" between holes on same side of bracket / 9-13/16" between holes on opposite sides of bracket
Mounting Hole Diameter:1/4"
PSI:1000
Power:12V DC
Dimensions:11" (l x 6" (W) x 7" (H)